There are two kinds of the air conditioner. Split and window ACs have two different functioning. In fact, their installation process is not similar at all. So, call an expert air conditioning in Brisbane. Companies who are functional for many years know where the difference lies. There are numerous things that you cannot look over while installing a split AC. In fact, these are the most crucial that you must abide by. Otherwise, your air conditioner fails to provide you with proper service. So, let's check out what specific features and steps we should follow or avoid while installing a split air conditioner.
Strength Of Wall To Hold The AC
The indoor unit of split AC is heavy. Therefore, it needs a strong wall. The wall must be strong enough to hold the unit's weight. Otherwise, it will bring damage to the foundation.
Adequate Spacing Between Wall And AC Unit
15cm of open space is a good measure that the indoor unit of a split AC requires. It surrounds its top and sides. Only then, it'll be able to provide proper airflow.
Appropriate Installation Height
The experts say that the indoor unit of a split AC needs to be installed at a height of 7-8 feet above the ground for adequate cooking inside the room.
Correct Tilt Angle Of Indoor Unit
While fixing the aluminum bracket on the wall make sure that the bracket is given a slight tilt angle, so that the indoor unit of split AC, when fitted is also at a slight angle to enable an unrestricted flow of the condensed water from the drain pipe. The experts of air conditioning installation in Brisbane say that it's a major part to consider while installing a split AC.
Proper Placement Of Outdoor Unit
Rigid and flat surfaces are ideal for installing an outdoor unit. This unit contains key components of split AC like compressor, condenser, fan motor, etc. If the unit is not on a flat surface then it will vibrate excessively, which can lead to the breakage of copper pipes, coolant leakage, and compressor damage. Instead, the vibrating unit disturbs you and your neighbors because it makes a lot of noise.
Proper Distance Between Outdoor And Indoor Unit
The correct distance between indoor and outdoor units plays a very important role in cooling. The coolant at a very low temperature flows inside the copper tubes between indoor and outdoor units of split AC.
These are some crucial factors to consider when you go for a split air conditioning installation in Brisbane. Make sure that you check all these things thoroughly before installing a split AC.
No comments:
Post a Comment